Canon IMAGE FORMULA DR-6010C - Manual (Page 70)

Chapter 4 Maintenance
4-6
Resetting the Counter
After replacing the feed rollers, open the [Counter setup] dialog box and reset the counter.
1
Open the [Event settings] dialog box.
1. Click [Start] - [Control Panel] to open the Control Panel.
Note
Under Windows 2000, click the [Start] button and select [Settings] - [Control Panel] to open
the Control Panel, then proceed to step 3.
2. Click [Hardware and Sound].
Note
Under Windows XP, click [Printers and Other Hardware].