Canon IMAGE FORMULA DR-6010C - Manual (Page 41)

Chapter 3 Basic Operation
3-11
Scanning With the Job Function
To scan using the job function, use the following procedure.
1
Place the documents into the feed tray. (See “3-3 Placing Documents,” on p. 3-5.)
2
Press the job button c to start the job.
The DR-6010C monitor appears, and scanning starts.
3
When scanning is complete, the image data are sent according to the preset conditions.
The message <Sending complete> appears on the DR-6010C monitor.
4
Click [Close] to close the DR-6010C monitor.
Note
• The default setting for job button c after the DR-6010C setup is completed is “Scan.”
• The scanned images are saved as PDF files in the folder [Pictures] under the folder
[Documents]. The file name is a 17-character string using the date and time when the
document is scanned.