Removing and attaching the retard roller, Removing and attaching the retard roller -11 – Canon IMAGE FORMULA DR-6010C User Manual

Page 75

Advertising
background image

Chapter 4

Maintenance

4-11

4

Carefully lower the upper unit. Finally, push the upper unit down with both hands at the sides

until the unit clicks into place. Verify that the upper unit is properly closed.

CAUTION

When closing the upper unit, be careful not to get your fingers caught, as this may

result in personal injury.

IMPORTANT

Do not force the upper unit to close. Doing so may damage the scanner.

Removing and Attaching the Retard Roller

To remove or attach the retard roller, proceed as follows.

CAUTION

Do not use excessive force when removing or attaching the retard roller. Doing so may

damage it.

Removing the Retard Roller

1

Hold the upper unit as shown in the diagram, and open it until it stops.

IMPORTANT

When opening the upper unit, do not grasp the roller unit in the center. Doing so may distort

the rollers and lead to a feeding error.

Advertising