PRG VL6C+ - Manual (Page 24)

16 VL6C+ ™ SPOT LUMINAIRE USER MANUAL
MOUNTING THE LUMINAIRE
Attaching a Truss Hook
The VL6C+ Spot Luminaire can be hung horizontally or vertically from any structure designed to accommodate the
load created by this moving luminaire. In standard hanging applications, the VL6C+ Luminaire utilizes a Series 300
double truss hook, which is bolted to the pan tube. The hook can be oriented in 45 degree increments to provide
flexible mounting. (See
"Standard Hang" on page 17.)
A special third-point truss hook, which mounts to the pan tube in addition to the double hook, is available to provide a
third point of support. (See
"Three-Point Hang" on page 19.)
To attach a double truss hook:
Step 1. Determine type of installation and required orientation of truss hook.
Step 2. At pan tube, attach truss hook using four 5/16-18 x 1" bolts and 5/16-18 nuts (Figure 2-1).
Step 3. Ensure truss hook is secure.
Figure 2-1: Attaching a Truss Hook
Truss
Pan Tube
Hook
5/16-18x 1" Grade 5
Bolt (53.7001.0003)
5/16-18 Nut
w/ Nylon Insert
(53.2025.0002)
Old Style
S300 Double Hook
New Style
S300 Double Hook
(22.9634.0217)
S300 Third-Point
Truss Hook
(22.9634.0195)
NOTE:
Use four 5/16-18 x 1" Grade 5 Bolts when
installing a Series 300 Double Truss Hook.