PRG VL6C+ User Manual
Page 55
Advertising
VL6C+ ™ SPOT LUMINAIRE USER MANUAL
47
CAUTION:
Do not touch gobo or color filters with bare fingers. Wear cotton gloves or other covering while
replacing.
Step
5. Using fingers, grasp frame of gobo or color filter and pull out of wheel hub (Figure 4-4.)
Figure 4-4: Replacing a Standard Gobo or Color Filter
Step
6. Noting proper orientation of carrier slot, insert new gobo or color filter into position and push fully into place.
Step
7. Re-install color/gobo bulkhead, as required, and re-connect cables to Yoke Termination PCB (Figure 4-3.)
Step
8. Re-install removable cover by positioning cover on head assembly and tightening two captive screws.
Gobo or Color Filter
Gobo or Color Wheel Hub
Carrier Slot
Advertising