PRG Mbox Designer User Manual v3.6.1 - Manual (Page 144)

136 MBOX ® MEDIA SERVER USER MANUAL
To add an MBOX server for monitoring, double-click on the server. The server(s) will be added to the window:
At the Server View Settings section of the Preferences window, adjust the Size (width in pixels), Mode (single or dual
output), Aspect (4:3 or 16:9), and number of columns as desired. It is a good idea to make things larger at this time,
and if you have servers using two outputs or a 16:9 aspect ratio, set those preferences as well. At the same time,
adjust the Breakout View Settings to have a similar size. (Notice that as soon as two columns are selected for the
Breakout View, they may obscure the servers. To correct this, make the entire window larger.)
The Breakout View can be toggled on and off by pressing [  B] on the keyboard.
When finished, close the Preferences window. Now servers can be dragged from the Server View column (far left) into
one of the Breakout View columns (the two right-hand columns).
Server View Column Breakout View Column 1 Breakout View Column 2