PRG Mbox Designer User Manual v3.6.1 - Manual (Page 91)

MBOX ® MEDIA SERVER USER MANUAL 83
The benefits of the various Drawmodes become more apparent when the holes cut into the Stencil are used to affect
more than one layer. Interesting results can be achieved by using a movie with a transparency effect to cut the Stencil.
In the example below, the left-hand image shows a movie playing on Layer 1, and on the right, that same movie with
the White Alpha Effect (056) turned on.
In the following example, Layer 1 is using Drawmode 5 and a movie is placed on Layer 2, shown with Drawmode 6 on
the left and then with Drawmode 8 on the right.
draw thru stencil draw onto stencil