Rinse the brewer, Fill the tank, Posivend – CMS Products 674 User Manual
Page 70: Turn posivend™ on or off, Rinse the brewer fill the tank, Posivend hotcup operators’ guide
PosiVend
HotCup Operators’ Guide
6740001
64
November, 2007
RINSE THE BREWER
WARNING
Very hot water will be dispensed in this test. Coming into contact
with hot water will HURT!
a. Press
, then press
until the display shows BREW RINSE.
b. Press
to rinse the brewer. The brewer cycles, and RINSING is displayed.
c. CONTINUE.
FILL THE TANK
a. Press
, then press
until the display shows TANK.FILL.
b. Press
. This clears any tank error and starts filling the tank, if necessary.
NOTE
If it is taking a long time to fill the tank AND THERE ARE NO
LEAKS, you may see TANK ERR in the diagnostic list again.
c. Just press
again after making sure there are no other problems, such as a restriction
in the water inlet line or a clogged water filter.
d. CONTINUE.
PosiVend
TURN POSIVEND™ ON OR OFF
a. Press
then
until the display shows one of the following:
sure.v off
: None of the PosiVend™ functions are available. Use this if the PosiVend™
system is not installed, or there is some reason you do not want to use it (for example in a
high cup theft situation).
sure.v on
. The PosiVend™ system is operative. All of the PosiVend™ functions are
available.
b. Press
to switch between the two choices.
c. Continue.