CMS Products 674 - Manual (Page 13)

HotCup Operators’ Guide Controls and Indicators
November, 2007 7 6740001
Controls and Indicators
Power Panel. You may have one of three power panels, depending upon where you live. The
controls are fundamentally the same, however.
Circuit Breakers. Circuit breakers protect the merchandiser against failures in the power supply or
any of the electrical components. If a circuit breaker trips and cannot be reset, consult your
troubleshooting manual.
Back Side of U.S./ Canada Power Control Panel. The circuit board mounted on the rear of the
U.S. and Canadian power control panel is a dc power supply for the coin mechanism. A fuse
protects the board circuitry in the event of a coin mechanism solenoid failure. If the coin mechanism
is not working, check this fuse. If the fuse is blown, a bad coin mechanism solenoid could be at fault.
Main Power Switch. This is the main ON/OFF switch for the merchandiser.
WARNING
To protect against electrical shocks and possible damage to the
machine, turn this switch OFF when performing any maintenance
on the merchandiser.
LABEL
MAIN
POWER
SWITCH
ELECTRONICS
BREAKER
O
I
626P0005