CMS Products 674 - Manual (Page 55)

HotCup Operators’ Guide Hot Drink Setup
November, 2007 49 6740001
Hot Drink Setup SET UP A HOT DRINK
Be sure that the cup sizes you set in (setup cup sizes page, ), agree with the cup sizes actually in
your machine. All procedures for setting up the hot drinks are similar, so this example will
demonstrate how to set up the A selection, regular size fresh brew coffee.
a. Press , then press until the display shows SETUP - *. The star (*) represents
the selection (A, B, etc.). The dash (-) represents the size of the selection.
b. Press A. (If you were setting up the A selection for the large size drink, you would press 1
first, then A.) The display shows WAT. A 12.00 . This means that the currently set water
throw time for the A selection is 12.00 seconds. Enter a new time if desired.
c. Press . The display shows DRY. A .60. This means that the currently set dry product
throw time for the A selection is .60 seconds. Enter a new time if desired.
d. Pressing after each display will cause the following screens to appear:
DRY. A+ View and change the settings for an extra strong drink
SUG. A View and change the settings for the sugar throw time
SUG. A+ View and change the settings for extra sugar throw time
LIT. A View and change the settings for the lightener throw time
LIT. A+ View and change the settings for extra lightener throw time
SUB. A View and change the settings for the sugar sub throw time
SUB. A+ View and change the settings for extra sugar sub throw time
STP. A View and change the steep time
STP. A+ View and change the steep time for an extra strong drink
AIR. A View and change the air compressor/pump running time
dly. A View and change the amount of time after the vend to open the auto vend door