CMS Products 674 - Manual (Page 58)

Hot Drink Setup HotCup Operators’ Guide
6740001 52 November, 2007
SET UP LOW POWER SETTINGS
Low power settings allow for the water tank to be set to a lower temperature at up to 4 different dates
and times. For example, you want to lower the tank temperature to 160º F overnight on Mondays
through Fridays. The machine tank temperature setpoint will be changed to 160º F at 6:00 pm and
maintained at that temperature until 5:00 am on the following morning when the setpoint is returned
to 202º F. Please keep in mind that at 5:00, the machine will just begin to increase to the 202º F
setpoint temperature. It is up to you to determine how long that will take and to allow enough time for
the tank to be at its proper temperature when the machine will be used. Typically, one hour is
adequate to return to the normal operating temperature.
NOTE:
The machine OUT OF SERVICE condition during the low power interval will be
determined by how you have set the LTDIS configuration.
a. Press then press until the screen displays LOW.PWR .
b. Press the number of the time interval you want to edit, or to edit time interval 1( we will
use interval 1 for this example.
c. The display shows low.pw ON or low.pw Off . This display tells you whether your time
interval (represented by 1) is on or off. Press to change the condition of the time
interval.
d. If you turn an interval ON, it must be edited. You can edit a time interval now, then turn it
OFF until another time.
e. Press . The display shows 1.STRT X.XX.. X.XX is the currently set start time. Enter
a new start time (24-hour format) for this interval. To enter the time for 6:00 pm, enter 1800.
f. Press . The display shows 1.STOP X.XX.. X.XX is the currently set stop time. Enter
a new stop time (24-hour format) for this interval. To enter the time for 5:00 am, enter 0500.
g. Press . The display shows 1.@ - - - - - - - . The dashes represent the days that this
time interval is active. Pressing number keys 1 through 7 switches the days on/off. For
example, press “2”, “3”, “4”, “5”, and “6”. The display now shows
1.@ - M t W t F - .
This interval is active on Monday through Friday.