Solvline Eddy DKV2.1.0.3 - Manual (Page 30)

Chapter 3. Development
Environment
30
2.4.2.8. Reset1: Reset
Pin name Function Discription I/O
PC16 nRESET
Polling Input signal continually from External Reset
key, implement as below with checking the constant
time of "Low."
Less than 5 seconds: General reset function.
More than 5 seconds: Factory Default function.
IN
2.4.3 LED Description
2.4.3.1. GPIO LED
Eddy-CPU v2.1 supports Max 56 GPIO ports. DK board has 20 GPIO LEDs of all GPIO to test. This
GPIO LEDs are controlled by UART select switches.(refer to 2.4.2.4 UART Select )
PIN name Function Discription I/O
PC10 CTS3 UART #3 Clear to Send I
PC8 RTS3 UART #3 Request to Send O
PB11 RXD3 UART #3 Receive Data I
PB10 TXD3 UART #3 Transmit Data O