Solvline Eddy DKV2.1.0.3 - Manual (Page 77)

Chapter 5.
Creating Firmware
77
mv $(FW_NAME) $(FIRMWARE_DIR)/
release:
 Register the desired application to the directory for copying to
Eddy
cp -f ../src/Eddy_APPs/hello_world root/sbin
cp -f ../src/Eddy_APPs/eddy root/sbin
cp -f ../src/Eddy_APPs/com_redirect root/sbin
cp -f ../src/Eddy_APPs/tcp_server root/sbin
cp -f ../src/Eddy_APPs/tcp_client root/sbin
cp -f ../src/Eddy_APPs/tcp_broadcast root/sbin
cp -f ../src/busybox-1.5.0/busybox root/bin
cp -f ../src/dropbear-0.50/dropbear root/usr/local/sbin
cp -f ../src/dropbear-0.50/dropbearkey root/usr/local/sbin
cp -f ../src/ethtool-6/ethtool root/usr/local/sbin
cp -f ../src/net-snmp-5.4.1/agent/snmpd
root/usr/local/sbin
List of task on the ‚Makefile‛ options are as follows;
Make release
; Copy modules registered on the release to Ramdisk area.
Make install ; Create a Filesystem to a firmware image for using on Eddy.
If the modification of ‚Makefile‛ is completed, execute ‚make release and ‚make install‛ in
turns and create a Firmware image.
Created firmware is stored on the ‚FIRMWARE_DIR‛ directory stated on the ‚Makefile‛.
On Windows, use cmd(command prompt) to carry out procedures explained on Linux.
[shlee@localhost ramdisk]$ make release
.
.
[shlee@localhost ramdisk]$
make install
.
.
[shlee@localhost ramdisk]$ ls ../firmware
-rwxr-xr-x -----------------------------------------eddy-bl-2.1.x.x.bin
-rwxr-xr-x -----------------------------------------eddy-bs-2.1.x.x.bin
-rwxr-xr-x -----------------------------------------eddy-os-2.1.x.x.bin
-rwxr-xr-x -----------------------------------------
eddy-fs-2.1.x.x.bin
.
.
Makefile options are as follows.
Make release
; copy module in release to ramdisk area
Make cfg ; create firmware image of Eddy enviromental files in ramdisk/flash
Make install ; create a firmware image of Eddy’s Filesystem
If changes to Makefile are complete, use ‚make install‛ command to create firmware image.