Solvline Eddy DKV2.1.0.3 - Manual (Page 82)

Chapter 6. Library
Introduction
82
Function Returns time measured after Eddy has been booted in msec.
Format Unsigned long SB_GetTick (Void);
Parameter None
Returns 0 ~ 4,294,967,295
Notice Returned value is system tick counter in msec unit.
After it reaches the maximum value 0xffffffff of unsigned long type, it
starts from zero again - which is about period of 50 days.
SB_msleep
Function Delays in msec unit.
Format void SB_msleep (int msec);
Parameter msec Configure delay time in msec unit.
Returns none
Notice Delays in exact msec unit.
SB_AliveTime
Function Returns time measured after Eddy has been booted in day, hour,
minute, and second.
Format void SB_AliveTime (int *day, int *hour, int *min, int *sec);
Parameter *day
*hour
*min
*sec Days Eddy has been operationg (0 ~ )
Hour (0 ~ 23)
Minute (0 ~ 59)
Second (0 ~ 59)
Returns None
Notice
6.4 Eddy Environment Function
Environment functions related with Eddy File System which gives information such as Eddy’s version,
environment configuration, version, etc.
SB_GetVersion
Function Reads version of O/S, file system, and bootloader ported to Eddy in string
type.