Solvline Eddy Serial Ver 2.1.0.3 - Manual (Page 12)

Chapter2. Getting Started
12
Classification Specification
Hardware
CPU ARM9260B-CJ (210 MHz)
Memory
AT45DB642D, 8MB Data Flash
IS42S16160B, 32 MB SDRAM
Ethernet MC/PHY
10/100 Base-T MAC
KSZ8041NLi PHYceiver Auto MDI/MDIX
Serials
Port 0,1 : RS232 (DB9 male)
Port 0 : Full Signal
Port 1 : TxD, RxD, RTS, CTS only
Port 2,3 : COMBO (Terminal Block 5pin)
* COMBO : RS422/RS485 is S/W selectable
USB 2.0 FS
3 Host /1 Device Port, 2.0 FS (12Mbps)
Use to GL850A USB Hub chip
RTC
Real Time Clock, RTC DS1340U-33+
Connect to I2C I/F
Battery Holder CR1220(38mAh) 3V Lithium Battery
ADC 4-Channel 10 Bit ADC
TWI(I2C) Master, Multi-Master and Slave Mode
SPI
8 to 16-bit Programmable Data Length
Four External Peripheral Chip Selects
MCI
SD Spec V2.0 [SDHC], MMC Spec V4.2 support
USB to SD Controller, 16GB, 12Mbits/s
GPIO Max. 34 Programmable I/O Pins
LED Ready LED
Software
Protocol
TCP, UDP, Telnet, ICMP, DHCP, TFTP, HTTP,
SNMP1&2, SSH, SSL
Network Connection Static IP, DHCP
O/S Lemonix Real Time Linux
Mgt Tools SNMP, Web, PortView
Uploads TFTP, FTP, Web
Dev Tools LemonIDE & SDK
Physical Power Input 3.3 V (200mA Max)