Solvline Eddy Serial Ver 2.1.0.3 - Manual (Page 51)

Chapter7. Appendix
51
System reset
notification
Enable
If Enable is selected, inform the ‚System reset info.‛
(Option : Enable, Disable)
Port connect
notification
Disable
If Enable is selected, inform the ‚Serial Port opened info.‛
(Option : Enable, Disable)
Port disconnect
notification
Disable
If Enable is selected, inform the ‚Serial Port Closed info.‛
(Option : Enable, Disable)
5.9 Change Password
Change Web/Telnet access username and password. After changing values, you need to click ‘Submit’ button.
Then you will see the same page with modified values. Please note that you have to ‘Save & Reboot’ in order to
see these changes in effect. Changes will be discarded if you do not save current settings.
◆ Default user id
: eddy
◆ Default password : 99999999
5.10 Update Firmware
Firmware is an application embedded in Flash memory of Eddy. Set the location of the firmware file to update, using
the ‘Browse…‘ button. The selected firmware will be transferred to Eddy when you click ‘Start Update’. After
the transmission is complete, Eddy will be automatically restarted to operate with the new firmware.