Solvline Eddy Serial Ver 2.1.0.3 User Manual
Page 46
Chapter7. Appendix
46
also program a customized GPIO application, and you can implement it with the SDK included in the Eddy
development kit.
Eddy-S4M provide 34ea GPIO port, different from Eddy-CPU, the sharing device is limited to ADC.
After changing values, you need to click ‘Submit’ button. Then you will see the same page with modified values.
Please note that you have to ‘Save & Reboot’ in order to see these changes in effect. Changes will be discarded
if you do not save current settings.
Menu
Default
Descriptions
Device
Select
Eddy
Set the GPIO port to current pin’s I/O mode.
Eddy: Set Eddy defined mode.
GPIO: Set only GPIO port mode.
User: Set only user mode.
Value
Output(Low)
Select the GPIO port to the specified mode.
Input(Pull-up): Standby with setting the GPIO to Vcc.
Input(Pull-down): Standby with setting the GPIO to Gnd.
Output(Low): 3.3V is not flowed through the port.
Output(High): 3.3V is output through the port.