Canon ImageCLASS 2300 - Manual (Page 14)

Flow of Copy Operations 1-5
Introduction to Cop
ying
1
The Copy Basic Features screen appears.
NOTE
For instructions on using Department ID Management, see Chapter 5, "System
Manager Settings," in the Reference Guide.
2
Place your original.
You can place your original both vertically and horizontally in the feeder or on the
platen glass.
For instructions on placing your original, see "Placing Originals," on p. 1-9.
NOTE
LTR originals can be placed either vertically or horizontally. However, the scanning
speed for horizontally placed originals is somewhat slower than for vertically placed
originals. You can place originals horizontally when scanning with a Preset Zoom,
such as when enlarging LTR to 11" x 17" .
Horizontally placed LTR originals are referred to as LTR .
11" x 17" and LGL originals must be placed horizontally.
If AUTO SORT is set to '1 ON' from the Additional Functions menu, the Collate
mode is automatically set when the original is placed in the feeder. (See "Auto
Sort," on p. 4-9.)
COPY
FAX
Collate
Special F eatures
Display C ontrast