Canon ImageCLASS 2300 User Manual
Page 66
Frame Erase
3-13
Special Cop
ying F
eatures
3
5
Press [F4] (ORIGNAL SIZE) to select the size of the book when
opened
➞ press [OK].
Each time you press
(ORIGNAL SIZE), the next or previous menu option
becomes highlighted.
The Frame Erase Width setting menu appears.
NOTE
You can set the Book Frame Erase mode only for the original sizes shown on the
LCD display.
The machine automatically selects the copy paper size according to the original
size you set. <AUTO PAPER> is displayed; however, you can also select the paper
size manually.
6
Press [F3] (-) or [F4] (+) to set the desired book frame erase
width (3 mm to 50 mm) for the center line
➞ press [OK].
You can also use the numeric keys to enter the book frame erase width, and
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the Copy Basic Features screen returns.
NOTE
The default setting is '10 mm'.
F4
C
F4
OK
F3
F4
OK