Canon ImageCLASS 2300 - Manual (Page 86)

Changing the Current Standard Settings 4-9
Customizing Settings
4
3
Press [F2] (-) or [F3] (+) to set the desired frame erase width
(01 mm to 20 mm)
➞ press [OK].
You can also use the numeric keys to enter the standard frame erase width, and
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the COPY SETTINGS menu returns.
4
Press [Reset] to return to the Basic Features screen.
Auto Sort
This setting allows automatic selection of the Collate mode when the originals are
placed in the feeder. This is helpful when making multiple copies, because you do
not need to remember to select the collating mode.
NOTE
The default setting is '01 ON'.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <02 COPY SETTINGS>
➞ press [OK].
The COPY SETTINGS menu appears.
C
F2
F3
OK
Reset
Additional Functions
F3
F4
OK