Canon ImageCLASS 2300 - Manual (Page 67)

Frame Erase 3-14
Special Cop
ying F
eatures
3
7
Enter the desired copy quantity (1 to 99) using the numeric
keys.
For details about entering the copy quantity, see "Specifying the Required
Number of Copies," on p. 2-2.
8
Press [Start].
Copying starts.
NOTE
If you want to cancel this mode, press (Stop)
➞ the cancel job display appears
➞ press
(YES) or (NO).
If you press (Stop) after copying has started, some blank sheets of paper may
print out.
To cancel all settings and restore the machine's standard settings, press
(Reset).
Set the frame erase width around the original using the COPY SETTINGS menu in
the Additional Functions menu. You can set from 1 mm to 20 mm. (See "Frame
Erase Width," on p. 4-8.)
Hole Punch Erase
This mode erases the shadows that appear in copies from binding holes on
originals.
IMPORTANT
If the machine is operating in the Hole Punch Erase mode, you cannot use the Two-Page
Separation, or Different Size Originals modes.
Do not place originals with binding holes in the feeder, as this may damage the originals.
1
Press [COPY].
lights, and the Copy Basic Features screen appears.
F3 F4
COPY
1 2 3
4 5 6
7 8 9
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER SYMBOLS
Start
COPY