Canon ImageCLASS 2300 - Manual (Page 59)

Margin Mode 3-6
Special Cop
ying F
eatures
3
3
Press [F2] (MARGIN).
The display for specifying the margin mode appears.
4
Press [F1] (LEFT MARGIN), [F2] (RIGHT MARGIN), [F3] (TOP
MARGIN), or [F4] (BOTTOM MRGN) to specify the type of
margin
➞ press [OK].
The Margin Width setting menu appears for the margin type you selected.
5
Press [F3] (-) or [F4] (+) to set the margin width (1 mm to 20
mm)
➞ press [OK].
You can also use the numeric keys to enter the margin width, and (Clear) to
clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the Copy Basic Features screen returns.
NOTE
The default setting is '10 mm'.
C
F2
F1
F2
F3
F4
OK
F3
F4
OK