Cuisinart SMARTPOWER DUET BFP-603 - Manual (Page 3)

3
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE
This appliance is of the grounded type. If you use an extension cord,
it should be a grounded type 3-wire cord. If the plug does not fit,
contact a qualified electrician. Do not modify the plug in any way.
This appliance comes with a resettable thermal fuse to prevent
damage to the motor in case of extreme overload. Should the unit
shut off unexpectedly, unplug it and let it cool for at least 15 minutes
before continuing (see “To reset the unit” #5 on page 6).
Maximum of 600 watts rated power is based on Cuisinart AFP-7
food processor attachment. Other attachments may draw
significantly less power.
SPECIAL CORD SET INSTRUCTIONS
NOTICE
For your protection, this unit is equipped with
a 3-conductor cord set that has a molded
3-prong grounding-type plug, and should be
used in combination with a properly connected
grounding-type outlet as shown in Figure A.
NOTE: Do not remove the grounding prong.
CAUTION: Before using an adapter, it must be determined that
the outlet cover plate screw is properly grounded. If in doubt,
consult a licensed electrician. Never use an adapter unless you
are sure it is properly grounded.
Note: Use of an adapter is not permitted in Canada.
UNPACKING INSTRUCTIONS
1. Place the gift box containing your Cuisinart ® SmartPower Duet ®
Deluxe 600-Watt Blender/Food Processor on a flat, sturdy
surface before unpacking.
2. Remove instruction booklet and other printed materials from top
of corrugated insert.
3. Next, remove the top corrugated insert. It contains the adapter
stem , the slicing/shredding disc and the pour lid. Carefully
remove slicing/shredding disc, as it is very sharp, then remove
pour lid and adapter stem.
4. Carefully lift blender base from box and set aside.
5. Remove the middle corrugated insert.
6. Remove the lower corrugated insert containing the blender jar
assembly. Be careful not to tip the jar when removing.”
7. Remove food processor accessory and any additional literature
from the box.
To assemble the blender, follow the Assembly instructions on page
5 of this instruction booklet. To assemble the food processor, follow
the Assembly instructions on page 9. Replace all corrugated inserts
in the box and save the box for repackaging. See the Features and
Benefits section on page 4 for a listing of all blender parts. See the
Features section on page 8 for a listing of all food processor parts.
Before using for the first time: Wash all parts according to the
Cleaning and Maintenance sections on pages 7 and 11 of this
booklet to remove any dust or residue.