Sterling Scale 825 - Manual (Page 23)

_____________________________________________________________________________________________________________
Revision 4.4 Copyright ©2004Sterling Scale Co., Inc. March 2005
Web Site: www.sterlingscale.com E-mail: [email protected]
DW810/825 Program Revision 4.23 – LD-2 Thermal Label Printer Format – Part No. 9504
TIME
10:58 AM Output if time and date option installed
DATE 07-24-98 Output if time and date option installed
ID NO. 123456 Output if an ID number other than 0 is entered
STATION # 1 Output is station number is not zero
SERIAL # 1 Output if serial number is not zero
GROSS WT. 1.018 lb. *
TARE WT. 0.018 lb. *Output if a tare weight is entered
NET WT. 1.000 lb. *Output if a tare weight is entered
APW .100 lb. *Output if in Count Mode
SMP SIZE 10 pcs. *Output if in Count Mode
QUANTITY 10 pcs. *Output if in Count Mode
* Print out chosen in parameter, see below.
Printer Parameter Setup – The following choices are in parameter setup.
Please Note: The LD-2 printer is capable of printing both human readable and
barcode data on the label. Only (4) lines of barcode are allowed on
the 2.25” wide x 4.00” long label.
If an item is chosen for the printout, then and only then will the DW810/825 prompt for a
barcode printout of that item. The item will then be printed in both barcode and human
readable.
Name
Description
OF LD-2
This indicates the installed printer driver
GROSS
N Gross Wt. is not printed
GROSS Y Gross Wt. is printed
BC
N Gross Wt. is not printed in barcode
Y Gross Wt. is printed in barcode
TARE
N Tare Wt. is not printed
TARE Y Tare Wt. is printed
BC
N Tare Wt. is not printed in barcode
Y Tare Wt. is printed in barcode
NET
N Net Wt. is not printed
NET Y Net Wt. is printed
BC
N Net Wt. is not printed in barcode
Y Net Wt. is printed in barcode
PRINTERS
Page 21