Studio Electronics Boomstar - Manual (Page 6)

2 Studio Electronics Boomstar Quick Start Manual Setup Essentials
2
SETUP ESSENTIALS
2.1 Warnings, Precautions, and Advice
WARNING
- When using electric products basic precautions should always be followed to avoid the possibility
of serious injury or even death to you or others, as well as damage to the device or other property from electrical
shock, fire, or other risks. These precautions include, but are not limited to, the following “to do” list
• Read, save, and understand all of the instructions before using product.
• Do not use product near any water source—such as a bathtub, wash basin, kitchen sink, wet floor, or swimming
pool.
• Clean with a soft, dry cloth with unit unplugged from AC outlet.
• This product, either alone or in combination with an amplifier and headphones or speakers, may be capable of
producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high
volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should
consult an Audiologist.
• Do not place anything heavy on the instrument.
• The product should be situated so that its location or position does not interfere with its proper ventilation.
• The product should be located away from heat sources such as radiators, heat registers, or other items that
produce heat.
• Avoid using the product where it may be affected by dust or hot sunlight.
• Make sure the line voltage in your location matches the input voltage specifications on the DC power adapter.
• All Boomstar synth models use an external power adapter. No other power supply or adapter other than the one
provided by Analogia Inc./Studio Electronics is to be used under any circumstances. Analogia Inc./ Studio Electronics
accepts no responsibility for damage caused by use of an unauthorized power supply or adapter.
• Mute channel volume before making audio connections to prevent malfunction and speaker damage.
• Unplug power supply cord from outlet when not in use for an extended period.
• Do not trample the power supply cord, trip over it, or pull at it; grasp the plug portion when unplugging.
• Care should be taken so that objects do not fall and liquid is not spilled into the enclosure through openings.
• Protect the unit from strong jolts and vibration and never apply strong pressure to the front, back or side panels,
or strike them in any manner.