Studio Electronics Boomstar - Manual (Page 7)

Studio Electronics Boomstar Manual 3 Setup Essentials
The product should be serviced by qualified service personnel when:
a) The power supply cord or the plug has been damaged.
b) Solid objects or liquid either have fallen or spilled into the product.
c) The product has been exposed to rain.
d) The product does not appear to operate normally or exhibits a marked change in performance.
e) The product has been dropped, or the enclosure damaged.
• Do not attempt to service the product beyond that described in the user maintenance instructions. All other
servicing should be referred to qualified technicians.
DANGER – INSTRUCTIONS RELEVANT TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS:
Do not open the chassis. There are no user serviceable parts inside. Refer all servicing to qualified
personnel only. All Boomstar synth models use an external power adapter. No other power supply or adapter other
than the one provided by Analogia Inc./Studio Electronics is to be used under any circumstances. Analogia Inc./
Studio Electronics accepts no responsibility for damage caused by use of an unauthorized power supply or adapter.
• Mute channel volume before making audio connections to prevent malfunction and speaker damage.
• Unplug power supply cord from outlet when not in use for an extended period.
• Do not trample on the power-supply cord, trip over it, nor pull at it, but grasp the plug portion when unplugging.
• Care should be taken so that objects do not fall and liquid is not spilled into the enclosure through openings.
• Protect the unit from strong jolts and vibration and never apply strong pressure to the front, back or side panels,
or strike them in any manner.
GROUNDING INSTRUCTIONS
: This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product
is equipped with a cord with equipment grounding conductor and a grounding plug, which must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not
modify the plug provided with the product. If it does not fit the outlet, have a proper outlet installed by a qualified
electrician.
SAVE THESE INSTRUCTIONS!