TechniSat DigitRadio 50 - Manual (Page 13)

13
>Now press Tune/ Select ( 4).
>Select by rotating Tune / Select (4 ):
Yes, if you remove the transmitter •
No if you want to cancel. •
>Confirm your selection by pressing Tune/ Select (4).
Display
>Open the menu by pressing the Mode / Menu (2).
>Turn Tune / Select (4) until you have reached the point display.
>Press Tune/ Select ( 4).
>Select by rotating Tune / Select (4) the display, which will be shown in the bottom
line and press to confirm Tune / Select (4).
Signal strength - Signal strength •
Program type - PTY •
Ensemble - Ensemble, to which the radio belongs •
Frequency - Frequency at which the radio station is transmitted •
Signal quality - signal quality at •
Codec and bit rate - bit rate and encoding of the data transmission •
Date - the current date •
Scrolling text - text transmitted by the radio station, such as Title / Artist •
FM mode
Automatic Tuning
>Press Tune/ Select ( 4) to search automatically for the next station and play.
Please refer to the setting in the point - search settings. Depending on the setting
and reception quality at the site either stations may be skipped or very poorly repro-
duced. In this case try to align the wired antenna differently and/or change the search