TechniSat DigitRadio 50 - Manual (Page 15)

15
>Select the desired favorite place by turning Tune / Select (4).
>Start a playback of favorites by pressing Tune / Select (4).
Display
>Open the menu by pressing the Mode / Menu (2).
>Turn until you have reached the point display Tune / Select (4).
>Press Tune/ Select ( 4).
>Select by rotating Tune / Select (4) the display, which will be shown in the bottom
line and press Enter to confirm Tune / Select (4).
Ps - Station name •
Radio text - text transmitted by the radio station, such as Title / Artist •
Program type - PTY •
Date - the current date •
Audio info - Stereo/Mono •
Scan Settings
>To open the menu stereo / mono, press Mode / Menu (2).
>Turn Tune / Select (4) until you have reached the point scan setting.
>Now press Tune/ Select ( 4).
>Rotate Tune / Select ( 4) for choosing whether the automatic channel selection
should stop for each channel ( all channels) or only for stations with strong signal
level (Only strong stations).
Note, very poorly reproduced that occur depending on the setting, either transmitter
or skipped that.
Audio Setup
>Open the menu by pressing the Mode / Menu (2).
>Turn Tune / Select (4) until you have reached the point audio setting.