TechniSat DigitRadio 50 - Manual (Page 19)

19
In the display the message that the alarm is stored appears.
With an active alarm in the display you see the respective alarm icon next to the time
displayed.
Snooze current alarm
Does the alarm clock switch on to set selected time, you have the possibility to let it
snooze for additional five minutes before it restarts.
> Push Snooze / Dimmer (7) to let the alarm clock snooze.
The screen now displays the time until the displayed the next time the alarm
Switch running alarm clock off
> Push Volume on / standby (3), to disable a running clock.
If you have programmed a repeat (Daily, Working days or weekends) alarm, starts this
it will start again to the certain time set at the next day.
Time
>Open the menu by pressing the Mode / Menu (2).
>Turn Tune / Select (4) until you have reached the point of time.
>Now press Tune/ Select ( 4).
Set time / date manually
>Turn Tune / Select (4) until you have reached the point set time / date.
>Now press Tune/ Select ( 4).