TechniSat DigitRadio 50 - Manual (Page 7)

7
Package Contents Please make sure that all items shown below are available :
DAB / DAB FM Clock Radio with wire antenna, •
Power Supply, 6V, 500 mA, •
Manual. •
Properties of the device
The DAB + digital radio is a new digital format, through which you can hear crystal
clear sound in CD quality.
The radio receives on FM frequencies 87.5-108 MHz ( analogue) 174.9 to 239.2 MHz
and DAB (digital).
You can save 10 station on favorite program places the DAB or FM mode.
The display has a light. This can be activated at different stages (see display illumina-
tion ).
Preparing the device for operation
Connect the device with the supplied AC adapter to the mains (230 V ~ / 50 Hz).
>To bring power to the device, the cable of the AC adapter needs first be connected
into the DC 6V (page 5 # 5 ) on the unit and then plug the power adapter into the
socket 230 V ~ / 50 Hz plug.
>After the initial installation of the network connection temporarily “ Welcome to
digital radio “ appears.
Please unplug the AC adapter from the outlet when not in use, prolonged absence or
thunderstorms.
Improve antenna reception
The number and quality of received stations depends on the reception conditions at
the installation site. With the wired antenna an excellent reception can be achieved.
This antenna must be aligned in full to get the best reception. Use the small loop at
the end of the wired antenna to fix this in the required position for a better reception.
Usage of headphones
Using headphones may damage your hearing!
Do not listen to the radio at high volume through headphones. This can lead to per-
manent hearing damage. Before using headphones adjust the sound volume to the
minimum level if you (not supplied ) to connect a pair of headphones, the internal
speaker is muted.
>Use only headphones with 3.5mm stereo plug.
>Plug the headphones into the headphone jack (page 5 # 6 ) of the device. The sound
reproduction is now done exclusively through the headphones.