TechniSat DigitRadio 50 - Manual (Page 16)

16
>Now press Tune/ Select ( 4).
>Rotate Tune / Select ( 4) to choose whether the sound should be played exclusively
in mono ( mono only ) or, if available, also in stereo ( Stereo Audio ). If the sound is
reproduced noisy, so the selection of mono only lead to a reduction of the noise.
Sleep Timer
The sleep timer can set the rest time for shutdown of your device.
>Open the menu by pressing the Mode / Menu (2).
>Turn Tune / Select (4) until you have reached the point of sleep.
>Now press Tune/ Select ( 4).
>Rotate Tune / Select ( 4) to the desired length of time (15, 30, 45, 60 or 90 minutes),
after which the device will turn off, or to adjust the function OFF.
>Confirm your selection by pressing Tune/ Select (4).
In active sleep timer on the display the timer icon is displayed next to the time.
Alarm Clock
Configure Alarm clock
>Press and hold Mode / Menu (2) for about 3 seconds to go directly to the alarm set-
ting.