Toa N-8000 Series Ver.1.41 - Manual (Page 140)

4-10
Chapter 4: BEFORE PERFORMING SYSTEM SETTINGS…
SW: p. 5-56
ST: p. 2-14
SW: p. 5-56
ST: p. 2-16
SW: p. 5-56
ST: p. 2-34
SW: p. 5-56
ST: p. 2-18
SW: p. 5-56
ST: p. 2-17
Item Default
Reference
page
Setting from
Software Setting from
browser Setting from
station
Incoming call mode
Automatic connection call tone
Continuous call tone
Group call member
Access to priority call Unavailable
Call forwarding destination station
Time-based call forwarding
destination station
Absence transfer destination station
Group hunting destination station
p. 5-56
p. 5-56
Automatic
connection mode
With a call tone
With a call tone
Refusal of priority call setting Allowed to accept
(when N-8000EX
is connected.)
Refuse to accept
(when N-8010EX
is connected.)
Level 3 Station speaker sound volume
p. 5-56
Calling staion indication/CCTV
called station's number
Calling staion indication/CCTV
contact output number
* 1 Settings can be performed from all master stations.
* 2 Fixed to "Refuse to accept" for the station connected to the N-8010EX Exchange.
* 1
* 1
* 1
* 1
* 1
* 2
BGM input
OFF BGM reception ON/OFF
Level 2 Microphone sensitivity
Unavailable
Access to paging call Available
External equipment control ON/OFF OFF
p. 5-56
Door remote contact output number
Door station mode
SW: p. 5-56
ST: p. 2-4
Level 3 Speaker output * 1
1.5. Stations
1.5.1. Function settings
1.4.5. Scan monitor
Item Default
Reference
page
Setting from
Software Setting from
browser Setting from
station
Scan monitor group
Scan monitor sequencing time 3 seconds
p. 5-55