Toa N-8000 Series Ver.1.41 - Manual (Page 242)

7-3
Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS /8500MS ONLY)
2 : L i n e m o n i t o r
3 : L o g
f i l e
3 : L o g f i l e
U p d a t e d
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
1 0 : 0 8 A M
2 0 0 0
1 0 : 0 8 A M
2 0 0 0
2 : L i n e m o n i t o r
O O O X O O O X X O O F F O O O
Step 1. Press the Menu key to place the display in setting
mode.
Step 2. Use the down arrow key or the [2] key to move the
cursor to "2: Line monitor."
Step 3. Press the Select key to display the connection status
for all sixteen lines. Lines are listed in order from left to
right as Line 1, Line 2, and so on up to Line 16.
3. MONITORING LINE STATUS
Causes the station's LCD to display the connection status for all sixteen lines associated with the exchange to
which the N-8000MS is connected.
The N-8500MS does not have the monitoring function.
Step 4. Press the Menu key to return the display to its normal
standby mode.
4. UPDATING LOG FILES
Update the file that stores the operation logs for the exchange or N-8500MS*.
Use this function when some malfunction has made it impossible to view the operation log via a PC (refer to
p. 6-15 , Browser Operation Log Display). Follow the procedures below to update the log file at the station,
then restart the exchange.
* Exchange when the station performing update is N-8000MS, and the N-8500MS itself when it is the N-8500MS.
Step 1. Press the Menu key to place the display in setting
mode.
Step 2. Use the down arrow key or the [3] key to move the
cursor to "3: Log file."
Step 3. Press the Select key to update the log file of the
exchange to which the station is connected or N-
8500MS.
Note
The status indicator located on the exchange's front
panel or N-8500MS remains lit during the update
process. Do not restart the system or turn off the power
while this light is on.
Step 4. Press the Menu key to return the display to its normal
standby mode.
Display symbol Contents Details
O Connected Station is connected to the line and communications are being
(Normal) performed correctly between the exchange and station.
X Unconnected Station is not connected to the line or a wire is broken.
F Connected Station is connected to the line, but communications are not
(Abnormal) being performed correctly.
"No Information" is displayed on the N-8500MS's LCD.