Toa N-8000 Series Ver.1.41 - Manual (Page 203)

5-59
Chapter 5: SYSTEM SETTINGS BY SOFTWARE Chapter 5: SYSTEM SETTINGS BY SOFTWARE
Station: Speed Dialing
5.7.2. Speed dialing settings
Step 1. Click "Speed Dialing" tab to display the following setting screen.
Available item differs depending on the type of stations.
Step 2. Enter the station numbers to be called for each of the one-touch dial keys ([7], [8], [9] and [0] keys)
and the Off-Hook function. (Master station only)
Tips
• Enter one-touch dialing programming using the Dial keys (12), Paging key, Paging response key,
Function key, Hold key, and/or Transfer key.
• Up to 20 digits dialing operation can be preset.
• To set keys other than the numerical keys listed above for speed dialing, enter these as follows:
[ ] key : #
[ ] key : *
Paging key : P
Paging response key : R
Function key
: F
Hold key : H
Transfer key : T
Step 3. Enter the master station number to be called when the IP door station's call button is pressed.
(Door station only)