Toa N-8000 Series Ver.1.41 - Manual (Page 220)

6-6
Chapter 6: SYSTEM SETTINGS USING THE BROWSER
5. OPERATION STATUS DISPLAY
Click Operation Status on the menu on the left side of the screen.
5.1. N-8000EX/8010EX
The screen below is an example for the N-8000EX.
[Operation buttons]
(1) Refresh
Updates status data for speech path, line, and contact.
(6) Save button
Write set data into the settings file in the equipment.
Notes
• The status indicator located on the equipment remains lit during the write process. Do not restart the
system or turn off the power while this light is on.
• Changed network settings are not immediately updated, and the new settings take effect only after the
exchange, multi interface unit, or IP station has been restarted. Restart the exchange, multi interface
unit, or IP station by pressing the restart button that appears at the upper right of the screen whenever
settings have been changed.