Operation – VACUUBRAND VACUU·CONTROL User Manual
Page 47
Operation
47
BA-N°: 999279/17.10.2014
>
For details about the operation modes and information
on use, please refer to the manual of the remote controlled
device.
Select operation mode
1. Click on the required operation mode.
5
Selected radio button is marked.
2. Confirm your selection with “OK“.
5
View switches to the previous display.
5
Status bar displays the selected operation mode.
During operation ...
...to switch from “Pump down” to “Vac control”
>
During “Pump down” operation, click on button “Mode”.
5
Button momentarily marked,
5
status bar displays “Vac control”.
...to switch from “Vac control” to “Auto mode
2
”
>
During “Vac control” operation, click on button “Mode”.
5
Button momentarily marked,
5
status bar displays “Auto mode”.
2 -> only valid for VARIO pumps!