Network configuration and updates – VACUUBRAND VACUU·CONTROL User Manual
Page 63
Network configuration and updates
63
BA-N°: 999279/17.10.2014
Not every
VACUU•CONTROL
®
update necessitates a CVC 3000
firmware update.
IMPORTANT!
>
Do not switch off any connected device while
updating!
>
Depending on connection a firmware update
may take up to 20 minutes.
Updating CVC 3000 firmware
1. Turn on your CVC 3000 controller, with the
VACUU•CONTROL
®
adapter connected.
2. Use your web browser to navigate to the
VACUU•CONTROL
®
interface.
3. Switch to “Control mode“.
4. Click “Quick navigation“ and then click “CVC Firmware“.
5. Enter the required password in the login window.
5
“CVC Firmware Update“ menu opens.
6. Follow the on-screen instructions.
5
Update starts,
5
progress bar shows update status,
5
“Update“ is displayed on CVC display (from V2.30).
7. Wait for the update to terminate see bar display. If the
screen freezes while updating, reload the page.
5
On-screen message in web browser,
5
VACUU•CONTROL
®
restarts,
5
an icon is displayed on the CVC 3000 display when con-
nected to
VACUU•CONTROL
®
Updating
CVC firmware
When do I have to
update?