Compaq 110 - Manual (Page 105)

Removal and Replacement Procedures
Maintenance and Service Guide 5–37
2. Remove the two M2.5 × 4.5 screws 1 securing the fan
bracket and fan to the system board (Figure 5-22).
3. Disconnect the fan cable from the system board 2.
4. Remove the fan bracket 3 and fan 4 from the base enclosure.
Figure 5–22: Removing the Fan
Reverse the above procedure to install the fan.
238850-003.book Page 37 Friday, December 21, 2001 2:53 PM