Compaq 110 User Manual
Page 75
Advertising
Removal and Replacement Procedures
Maintenance and Service Guide
5–7
5. Remove the mini PCI compartment cover.
6. Pull away the plastic retention clips on each side of the mini
PCI communication board 1 (Figure 5-4). The board tilts
upward.
7. Lift the edge of the board and slide it gently out of the
connector 2.
Figure 5–4: Removing the Mini PCI Communication Board
8. Place the board in an electrostatic-safe container.
Reverse the above procedure to install the mini PCI
communication board.
238850-003.book Page 7 Friday, December 21, 2001 2:53 PM
Advertising