Compaq 110 - Manual (Page 27)

2–2 Maintenance and Service Guide
Troubleshooting
Using the PhoenixBIOS Setup Utility
The PhoenixBIOS Setup Utility (PSU) is built into the system.
You can configure the system BIOS and modify or restore factory
default settings, such as date and time, types of disk drives, power
management, and password settings. To run PSU, press
F10
during system startup. When the main screen displays, use the
keyboard and arrow keys to move around the menus and make
selections.
238850-003.book Page 2 Friday, December 21, 2001 2:53 PM