Compaq 110 - Manual (Page 86)

5–18 Maintenance and Service Guide
Removal and Replacement Procedures
5.10 Heat Sink
1. Prepare the computer for disassembly (Section 5.3) and, in
the order below, remove the following components:
❏ LED cover (Section 5.6)
❏ Keyboard (Section 5.7)
❏ Optical drive (Section 5.8)
❏ Display (Section 5.9)
✎
The heat sink is secured to the base enclosure by five screws that
are two different sizes. Be sure to carefully note the size and
location of each screw.
Heat Sink
Spare Part Number Information
Heat sink (used only with computer models with
1.0-GHz processors)
Heat sink (used only with computer models with
850-, 800-, and 700-MHz processors)
269863-001
233555-001
238850-003.book Page 18 Friday, December 21, 2001 2:53 PM