Compaq 110 - Manual (Page 92)

5–24 Maintenance and Service Guide
Removal and Replacement Procedures
5.12 Top Cover
1. Prepare the computer for disassembly (Section 5.3) and, in
the order below, remove the following components:
❏ LED cover (Section 5.6)
❏ Keyboard (Section 5.7)
❏ Optical drive (Section 5.8)
❏ Display (Section 5.9)
❏ Heat sink (Section 5.10)
2. Turn the computer bottom side up with the front facing you.
✎
The top cover is secured to the base enclosure by 15 screws that
are two different sizes. Be sure to carefully note the size and
location from which each screw was removed.
Top Cover
Spare Part Number Information
Top cover 233568-001
238850-003.book Page 24 Friday, December 21, 2001 2:53 PM