Wilson Audio WATCH Center Series 3 - Manual (Page 10)

Section 2.1—Uncrating the WATCH Center Channel
Initial Check
The WATCH Center Channel is shipped in a wooden crate. If you have also purchased
a Center stand, it is shipped in a separate cardboard box. Upon receiving the crate (and
cardboard box), please check their condition. If there is any damage, please report it to the
shipping company immediately for insurance verification.
The following items are recommended for this procedure:
• Supplied hardware kit
• Tape measure
• Known listening position
• Electric screwdriver
• Phillips head drive bit or Phillips head screwdriver
Uncrating the WATCH Center
Gently lift the Center channel out of the crate. Remove the plastic outer bag. Inven-
tory the crate contents. Move the Center channel into the desired location.
Note: Do not cut the bag off of the Center channel. By using scissors or a knife, you
could unintentionally damage the paint surface or a driving element. Keep the bag in
case you need to repackage the Center channel. Likewise, save your shipping crates and
all packing materials. They are specifically designed to prevent harm from coming to
your WATCH Center.
Note: Be careful not to touch the driver elements when you are moving your Center
channel.
S
E C T I O N
2 . 1 — U
N C R A T I N G T H E
W A T C H C
E N T E R
C
H A N N E L
W A T C H C
E N T E R
C
H A N N E L
S
E R I E S
3 O
W N E R
’
S
M
A N U A L
18 19
W i l s o n A u d i o S p e c i a l t i e s W i l s o n A u d i o S p e c i a l t i e s