Wilson Audio WATCH Center Series 3 User Manual

Page 36

Advertising
background image

Section 6.1—Care of the Finish

The WATCH Center Channel Series 3 loudspeaker is hand painted with WilsonGloss™

paint and hand polished to a high luster. While the finish seems quite dry to the touch,

final curing and complete hardening takes place over a period of several weeks.

Dusting the WATCH Center

It is important that the delicate paint finish of the WATCH Center be dusted carefully

with the dust cloth, which has been provided. We recommend that the following procedure

be observed when dusting the speakers:

• Blow off all loose dust.

• Using the special dust cloth as a brush, gently whisk off any remaining

loose dust.

• Shake out the dust cloth.

• Dust the finish, using linear motions in one direction parallel to the floor.

Avoid using circular or vertical motions.

Because the paint requires a period of several weeks to fully cure, we recommend that

no cleaning fluids, such as glass cleaners, be used during this initial period of time. When

the paint is fully cured, heavy fingerprints and other minor smudges may be removed with

a glass cleaner. Always use the dust cloth. Stronger solvents are not recommended under

any circumstances. Consult your dealer for further information if required. To maintain the

high luster of the finish, periodic polishing may be desired. We recommend a nonabrasive

carnauba-based wax and a soft cloth.

Care of the Grills

Periodically, you will want to clean the WATCH Center’s grills. This is best done by

S

E C T I O N

6 . 1 — C

A R E

O F

T H E

F

I N I S H

W A T C H C

E N T E R

C

H A N N E L

S

E R I E S

3 O

W N E R

S

M

A N U A L

70

71

W i l s o n A u d i o S p e c i a l t i e s

W i l s o n A u d i o S p e c i a l t i e s

Advertising