Wilson Audio Cub Series 2 - Manual (Page 37)

4-1
Note: Before setting up the Cub System II study carefully the previous section on room
acoustics. It provides valuable information on determing the ideal room location for your
speakers.
P
REPARATION
You will need the following items:
• Supplied hardware kit
• Tape measure
• Known listening position
S
ETUP
P
ROCEDURE
1. Stand the unit up (inside the crate) and gently walk/slide the CUB out of the
crate. Remove the plastic outer bag by tilting the CUB over and opening the
bag at the base of the CUB. Stand the CUB up and remove the bag.
Note: Do not cut the bag off of the CUBs. You may mark the cabinet or damage a
driving element. Additionally, you will need this bag, if you need to repackage the
CUBs. Save your shipping crates and all packing materials, they are specifically de-
signed to prevent harm from coming to your CUBs.
2. Move the CUBs into the desired location.
Note: Be careful not to touch the driving elements when you are moving your
CUBs!
C
U B
S
Y S T E M
I I S
E T U P