Wilson Audio Cub Series 2 - Manual (Page 38)

C
U B
O
W N E R
ʼ
S
M
A N U A L
Note: Your CUB loudspeaker enclosures are hand-painted with Wilsongloss paint and
hand-polished to a high luster. While the paint seems quite dry to the touch, final curing
and complete hardening takes place over a period of four weeks. To protect the finish of the
CUBs during final manufacturing, shipment, and setup in your listening room, we have in-
stalled a removable layer of protective film,over the finish. We recommend that this film be
left in place until the speakers are in their final location in your listening room. Once you
have determined their final position, remove the film by gently peeling it off. Do not leave
this film on indefinitely, as it may leave impressions on the paint.
P
R O T E C T
Y
O U R
F
I N I S H
3. Set the stands in the desired listening location and attach the spikes.
(see Figure 4 below)
Note: If you did not purchase the optional stand skip to step 5.
Cub Stand Spike
F
IGURE
4- I
NSTALLING THE
C
UB
S
TAND
S
PIKES
4-2