Wilson Audio Cub Series 2 - Manual (Page 57)

T
R O U B L E
S
H O O T I N G
G
U I D E
A-3
If the problem is solved: Call your Wilson Audio
dealer. There may be a problem with the cross-
over or the speakerʼs internal wiring.
If the problem persists continue on to the next
step.
Turn the amplifier off and disconnect it from the
AC wall outlet. Disconnect the speaker cable
leads to the amplifier and turn the amplifier on
again.
If the problem is solved: You have a short in
your speaker cables. Check for frayed ends,
holes (from spike feet), or make sure that your
spade lug is not touching the chassis while it is
connected to the binding post.
If the problem persists: Call the dealer where
you bought your amplifier. You appear to have a
problem with this component.