Crimestopper Security Products CS-2012DPII-TW1 - Manual (Page 11)

11
REMOTE ENGINE CONTROL
ENTERING YOUR REMOTE STARTED VEHICLE:
1) With engine running, Remote Unlock/Disarm system (If armed) or open door with key.
2) Enter vehicle and be careful not to step on brake pedal! (Remote Start Reset)
3) Turn Ignition to ON/RUN position, then press brake pedal to reset the Remote Starter & Shift out of park.
4) Remote starter will reset instantly when the brake is pressed. Parking lights will turn off and the ignition key
is now controlling your vehicle.
IDLE DOWN MODE (TAKE-OVER OPERATION)
This mode allows the unit to take over operation of your idling, parked vehicle while the ignition key is
removed and you exit the vehicle. The vehicle is put into a remote running condition before you exit and it will
remain running for the programmed run time, until you return, or until the remote start button is pressed.
Examples:
You pull up to a convenience store for a coffee, "Idle Down" mode keeps engine running when you exit the vehicle, (with keys in
hand) remote lock/arm alarm. When you return, unlock/disarm alarm, turn ignition ON and drive away.
IDLE DOWN MODE - EXITING THE VEHICLE:
1) With engine running, press and release the Start button. Siren will chirp 3 times for confirmation.
2) Parking Lights will turn ON.
3) Doors will unlock, or if brake pedal is being depressed then doors will unlock when it is released.
4) Turn OFF Ignition and remove key. Engine should remain running.
5) Exit vehicle then remote lock doors if desired.
6) Engine will remain running for programmed run time, until you return, or press the remote start button.
IGN
SOLID
OFF
UNLOCK
START
ENTERING A VEHICLE DURING “IDLE-DOWN” or “INFINITY RUN” MODES:
See “ENTERING YOUR REMOTE STARTED VEHICLE” section above.