Crimestopper Security Products CS-2012DPII-TW1 - Manual (Page 16)

16
TRANSMITTER PROGRAMMING
Note: Remotes Transmitters come pre-programmed from the Factory. When re-learning remotes or
adding remotes, ALL your system’s remote codes must be learned at time of programming!! This
system allows storage of up to 4 different remote codes in memory.
1. Turn key to the ON position. (Starting the vehicle is not necessary.)
2. Press Program/Valet button 4 times. After a few seconds, the unit will flash the parking lights 4 times.
3. Press Button #1 (Lock) & #2 (Unlock) button [at the same time] of the transmitter to be learned. You should
get 2 light flashes indicating the code-learn. Press the Lock and Unlock Buttons on a second, third or
fourth remote. If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn
key OFF and close the hood.
NOTES: When learning pager remotes, wait for a beep confirmation tone from the remote before learning
another remote. When learning 1-way “Sidekick” remotes, you do not have to wait. The system will not flash
the lights after learning the 4th remote code.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
2-WAY REMOTES
IGN
OFF
PRESS TOGETHER
LOCK &
UNLOCK
"SideKick" REMOTES
COMPLETE
OR
PRESS TOGETHER
LOCK &
UNLOCK