Pager remote battery replacement – Crimestopper Security Products CS-2012DPII-TW1 User Manual

Page 17

Advertising
background image

17

PAGER REMOTE BATTERY REPLACEMENT

CS-2012DP-TW1 PAGER (LOW BATTERY WARNING)
The CS-2012DP-TW1 Pager LED has a low battery warning system.
When the battery voltage is low, the Orange & Green LEDs flash 6
times with any button that is pressed. We recommend replacing the
battery for proper operation. To replace the battery, simply unlock
and slide open the battery door on the back of the LED remote.
Carefully remove the low battery, then insert a new battery (AAA)
using the outline on the button of the battery compartment as a guide.
Your remote will beep 3 times when the battery is inserted correctly.

NOTE:
Carefully insert the new battery. If done correctly the remote will beep
3X when the new battery installed. If the remote does not beep or
respond after replacing the battery, remove the battery and re-insert.































FLASH 6X

ORANGE

AND

GREEN

Advertising